Skip to main content
AllDigital

Compare
Back

Product code: #ALL-000639

Combined smoke, temperature and CO detector with battery Ajax FireProtect 2 RB (Heat/Smoke/CO) (8EU) White

Ajax

Combined smoke, temperature and CO detector with battery Ajax FireProtect 2 RB (Heat/Smoke/CO) (8EU) White

301 ₾

VAT included

  • In stock
301 ₾

VAT included

  • In stock
Quantity
1

Installation request
PaymentBy cardBy bank transfer
Datasheet (opens in a new tab)

Compare with similar

Full comparison

Description

The Ajax FireProtect 2 RB (Heat/Smoke/CO) is a wireless combined fire detector in white. It contains a smoke sensor, a heat sensor and a chemical CO (carbon monoxide) sensor. It runs on 2 × CR123A batteries and connects over the Jeweller wireless protocol.

For smoke, it uses a double-spectrum optical sensor that does not react to water vapor. A patented smoke chamber protects the sensor from dust, dirt and insects. The built-in siren reaches 85 dB at a distance of 9 ft, and alarms of interconnected fire detectors are passed on via primary interconnection.

Key features:

  • Heat detection according to the requirements for Class A1R heat detectors, with an alarm at temperatures above 147°F or when the temperature rises more than 50°F in 1 minute or less
  • CO alarm on accumulated dose: more than 50 ppm (0.005%) in no more than 90 minutes, more than 100 ppm (0.01%) in no more than 40 minutes, more than 300 ppm (0.03%) in no more than 3 minutes
  • Jeweller wireless connection with a range of 1700 m (5577.4 ft), GFSK modulation, and block encryption with a floating key for stored and transmitted data
  • Radio frequency change to prevent radio interference and jamming
  • Tamper protection and device authentication, with connection loss detected within 15 minutes
  • Battery life of up to 7 years, a sensor life of 10 years, and LED indication: green for power, yellow for malfunctions, red for fire alarms
  • Operating temperature 0 … +50 °C (32 … 122 °F), humidity up to 80%, IP20, 4.88″ × 4.88″ × 1.77″, 274.5 g (9.68 oz); supplied with a SmartBracket mounting panel, installation kit, pre-installed batteries and Quick Start Guide

Specifications 37

Open the spec sheet PDF(opens in a new tab)

Power & Protection

IP / IK Rating
IP20
Power Source
Battery (2 × CR123A)

Overview

Detection Type
Double-spectrum optical smoke sensor + heat sensor + chemical CO sensor
Wireless Protocol
Jeweller
Wireless Range
1700 m (5577.4 ft)
Encryption
Block encryption with a floating key

Battery

Battery
2 × CR123A
Battery Life
up to 7 years

Physical

Operating Temperature
0 … +50 °C (32 … 122 °F)
Weight
274.5 g (9.68 oz)
Tamper Alarm
Yes

Full specification

Manufacturer data, 26 parameters

Communication

Radio Frequency Bands
866.0 – 866.5 MHz;
868.0 – 868.6 MHz;
868.7 – 869.2 MHz;
905.0 – 926.5 MHz;
915.85 – 926.5 MHz;
921.0 – 922.0 MHz
Maximum effective radiated power (ERP)
up to 20 mW
Radio signal modulation
GFSK
Encryption of radio communication
All the data stored and transmitted are protected by block encryption with a floating key.
Radio frequency hopping
To prevent radio interference and jamming.

Sensitive elements

Sensitive Elements
smoke sensor;
heat sensor;
CO (carbon monoxide) sensor

Smoke detection

Sensitive element
double-spectrum optical sensor
Protection from false alarms
Does not react to water vapor.
Patented Smoke Chamber
Protects the smoke sensor from dust, dirt, and insects.

Dangerous Temperature Detection

Sensitive element
according to the requirements for Class A1R heat detectors
High Temperature Alarm
at temperatures above 147°F
Temperature Spike Alarm
when the temperature rises more than 50°F in 1 minute or less

Carbon monoxide (CO) detection

Sensitive element
chemical CO sensor
Alarm if accumulated dose of CO is exceeded
more than 50 ppm (0.005%) — no more than in 90 minutes;
more than 100 ppm (0.01%) — no more than in 40 minutes;
more than 300 ppm (0.03%) — no more than in 3 minutes

Sensor life

Sensor life
10 years

Additional Features

Built-in Siren
volume 85 dB at a distance of 9 ft
Interconnected Fire Detector Alarms
via primary interconnection
LED Indication
green is a power indication;
yellow is an indication of malfunctions;
red is an indication of fire alarms

Anti-sabotage protection

Protection against spoofing
device authentication
Detection of Communication Failure
within 15 minutes

Power Supply

For FireProtect 2 RB (Heat/Smoke/CO)
2 × CR123A battery

Enclosure

Dimensions
4.88″ × 4.88″ × 1.77″
Operating Humidity
up to 80%
Colours
Black;
White

Complete set

Complete set
FireProtect 2 RB (Heat/Smoke/CO) Jeweller;
SmartBracket mounting panel;
Installation kit;
2 × CR123A battery (pre-installed);
Quick Start Guide

Additional information

Warranty
24 months

Related products