Skip to main content
AllDigital

Compare
Back

Product code: #ALL-000834

Transmitter Ajax MultiTransmitter (8EU) ASP White

Ajax

Transmitter Ajax MultiTransmitter (8EU) ASP White

  • IP / IK RatingIP40, IK06
  • Alarm Device TypeWireless module to integrate up to 18 third-party devices into the Ajax system
376 ₾

VAT included

  • In stock
376 ₾

VAT included

  • In stock
Quantity
1

Installation request
PaymentBy cardBy bank transfer
Datasheet (opens in a new tab)

Compare with similar

Full comparison

Description

The Ajax MultiTransmitter (8EU) ASP White is a wireless module that integrates up to 18 third-party devices into the Ajax system. It connects wired devices through 18 wired zones and communicates with the system over the Jeweller protocol.

The module is powered from 100–240 V~ mains, 50/60 Hz, and is designed for indoor use only. A 12 V⎓ backup battery of up to 7 Ah can be connected (not included). The housing has tamper protection.

Key features:

  • Jeweller wireless protocol with a communication range of up to 2000 m (6561.7 ft), block encryption featuring a dynamic key, and device authentication
  • 18 wired zones with NC, NO, EOL, 2EOL and 3EOL connection types, in pulse or bistable mode, with cable length of up to 1,300 ft
  • 15 event types of wired devices, including Intrusion, Fire, Panic button, Gas alarm, Leakage, Glass break and Vibration (seismic sensor), plus Custom
  • Power for connected devices at 10.5–15 V⎓, up to 1 A of total maximum current consumption, with 2 power lines for other devices and 1 power line for fire detectors
  • Connection loss detection within 36 seconds, and instant detection of wired connection loss, short circuit and malfunction when using the EOL, 2EOL or 3EOL connection type
  • IP40 and IK06 protection, operating temperature from -10 to +40 °C (14 to 104 °F), and operating humidity of up to 75%
  • Dimensions of 7.55″ × 9.37″ × 3.94″ and weight of 874 g (30.83 oz)

Specifications 44

Open the spec sheet PDF(opens in a new tab)

Power & Protection

IP / IK Rating
IP40, IK06
Power Source
Mains 100–240 V~, 50/60 Hz;
backup battery 12 V⎓ up to 7 Ah (not included)
Mains Voltage
100–240 V~, 50/60 Hz
Current Draw
14.6 mA (quiescent), 69.6 mA (maximum)

Overview

Alarm Device Type
Wireless module to integrate up to 18 third-party devices into the Ajax system
Wireless Protocol
Jeweller (Ajax)
Wireless Range
2000 m (6561.7 ft)
Encryption
Block encryption featuring a dynamic key

System Capacity

Max Zones
18

Physical

Operating Temperature
-10 … +40 °C (14 … 104 °F)
Weight
874 g (30.83 oz)
Tamper Alarm
Yes

Full specification

Manufacturer data, 32 parameters

Communication

Frequency bands
866.0 – 866.5 MHz 868.0 – 868.6 MHz 868.7 – 869.2 MHz 905.0 – 926.5 MHz * 915.85 – 926.5 MHz 921.0 – 922.0 MHz
Maximum effective radiated power (ERP)
up to 20 mW
Radio signal modulation
GFSK

Wired Devices Connection

Number of zones
18 wired zones
Type of connection
NC, NO, EOL;
NC, NO, EOL, 2EOL, 3EOL
EOL resistance
from 1 kΩ to 7.5 kΩ with 100 Ω increment;
from 1 kΩ to 15 kΩ for each resistor, up to 30 kΩ of total resistance
Cable Length
up to 1,300 ft
Operation Mode
pulse, bistable
Event types
15 event types of wired devices;
Tamper alarm;
Intrusion;
Fire;
Auxiliary alarm;
Panic button;
Gas alarm;
Malfunction;
Leakage;
Glass break;
High temperature;
Low temperature;
Masking;
Duress code (opening);
Vibration (seismic sensor);
Custom
Recommendations
The device is powered from the 100–240 V~ mains and designed for indoor use only.

Sabotage Protection

Protection against spoofing
device authentication
Communication loss detection
within 36 seconds
Instant detection of wired connection loss, short circuits, and malfunctions
when using EOL/2EOL/3EOL connection type

Power Supply

MultiTransmitter Jeweller power supply
100–240 V~, 50/60 Hz
Type
type A
Device’s operating voltage range
100–240 V~, 50/60 Hz
Device's Quiescent Current at Nominal Voltage
14.6 mA
Device's Maximum Current at Nominal Voltage
69.6 mA
MultiTransmitter Jeweller backup power supply
12 V⎓, up to 7 Ah capacity with a full charge cycle of up to 30 hours
Low battery voltage
11.4 V⎓
Low battery recovery voltage
12.9 V⎓
End-of-life battery voltage
11.1 V⎓
Maximum output peak-to-peak ripple battery voltage
50 mV⎓
Minimum backup battery energy level in the charged state
100%
Connected devices power supply
10.5–15 V⎓, up to 1 A of total maximum current consumption;
Two power lines powered by MultiTransmitter Jeweller for other devices. One power line for fire detectors.

Casing

Dimensions
7.55″ × 9.37″ × 3.94″
Weight of the White Device
30.83 oz
Weight of the Black Device
28.29 oz
Operating Humidity
up to 75%
Colors
Black;
White

Complete set

Complete set
MultiTransmitter Jeweller board;
Casing;
Power cable;
Screw terminal block Adapter (only for INCERT compliance);
12 V⎓ battery connection cable;
Installation kit;
Quick start guide

Additional information

Warranty
24 months

Related products