Outdoor motion detector (wireless, with camera) Ajax MotionCam Outdoor HighMount (PhOD) Jeweller (8EU) ASP white, motion sensor with camera

Power & Protection

IP / IK Rating

IP55

Power Source

Battery (6 × CR123A);
optional external supply 12−24 V⎓

Current Draw

45 μA (quiescent), 1,200 mA (maximum)

Overview

Detection Type

2 × PIR sensor + K-band microwave sensor (24 GHz), with photo verification camera

Wireless Protocol

Jeweller, Wings

Radio Frequency

866.0–866.5 MHz;
868.0–868.6 MHz;
868.7–869.2 MHz;
905.0–926.5 MHz;
915.85–926.5 MHz;
921.0–922.0 MHz

Wireless Range

1700 m (5577.4 ft)

Encryption

Block encryption featuring a dynamic key

Detection

Detection Range

15 m

Detection Angle

90° (horizontal)

Pet Immunity

not available

Anti-masking

Yes

Battery

Battery

6 × CR123A

Battery Life

up to 3 years

Physical

Operating Temperature

-25 … +60 °C (-13 … 140 °F)

Weight

1.01 kg (2.23 lb)

Tamper Alarm

Yes

Jeweller communication technology

Maximum effective radiated power (ERP)

up to 25 mW

Radio signal modulation

GFSK

Encrypted Communication

All stored and transmitted data are protected by block encryption featuring a dynamic key.

Frequency Hopping

To prevent radio interference and jamming.

Detection

Sensitive Elements

2 × PIR sensor;
1 × K-band microwave sensor;
Operating frequency: 24 GHz.

Motion detection speed

from 1.0 to 6.6 ft/s;
The direction of the detector sensors should be perpendicular to an alleged intrusion path into the facility.

Sensitivity

3 levels;
Adjusted by a PRO or a user with admin rights in Ajax apps.

False alarm prevention

SmartDetect;
Software algorithm.

Temperature compensation

Effective movement detection in temperatures from −13 °F to 140 °F.

Photo Verification

Photo by Alarm

The built-in camera is activated if the detector is armed and movement is detected.

Photo on Demand

A user takes pictures at any time or when the detector is armed (depending on settings). The feature is disabled by default.

Photo by Scenario

The detector takes pictures automatically when other Ajax detectors are triggered. The feature is not configured by default.

Photo by Schedule

The detector automatically takes photos at the specified time. The feature is not configured by default.

Photo by Arming/Disarming

The detector automatically takes photos when the security state is changed.

Adjustable photo resolution

640 × 480 px;
320 × 240 px (default);
Adjusted by a PRO or a user with admin rights in Ajax apps.

Camera viewing angles

horizontal: 115°;
vertical: 84°

HDR Image

Improves the accuracy of detail in bright and dark scenes.

IR backlight

For night photography and low light conditions.

Series of pictures

from 1 to 5 images with a resolution of 320 × 240 px;
from 1 to 3 images with a resolution of 640 × 480 px;
Adjusted by a PRO or a user with admin rights in Ajax apps.

Photo Delivery Time

up to 9 s for 320 × 240 px resolution;
up to 20 s for 640 × 480 px resolution;
Photo delivery time depends on the image resolution selected in the device settings.

Recommendations

It is recommended to install the detector at a height of 6.6–13.1 ft.;
The pet immunity feature is not available for this device.;
The device is designed for outdoor and indoor use.

Sabotage Protection

Magnetometer

detects attempts to tilt or shift the detector or detach it from the surface

Anti-masking system

detects attempts to block the detector view

Holding Screw

secures the device on SmartBracket

Protection against spoofing

device authentication

Communication loss detection

after 36 s;
Detection time depends on the Jeweller/Fibra settings.

Main Power Supply

Type

type C

Detector Operating Voltage Range

3.8−6.5 V⎓

Detector Nominal Operating Voltage

6 V⎓

Quiescent Detector Current Consumption at Nominal Voltage

45 μA

Maximum Detector Current Consumption at Nominal Voltage

1,200 mA

Full battery capacity

4,800 mAh

Low battery voltage

4.2 V⎓

Low battery recovery voltage

5.0 V⎓

End-of-life battery voltage

3.8 V⎓;
The device is switched off.

End-of-life battery capacity

300 mAh

Manufacturer

Huiderui

Optional power supply

External Supply Operating Voltage

12−24 V⎓;
The batteries serve as a backup when an external power supply is connected.

Enclosure

Dimensions with the Swivel Mount

9.21" × 3.86" × 9.06"

Dimensions without the Swivel Mount

9.21" × 3.86" × 5.39"

Weight with the Swivel Mount

35.6 oz

Weight without the Swivel Mount

21.9 oz

Operating Humidity

up to 95%

Color

White

Certification and compliance with standards

Security Grade (SG)

2

Environmental class according to EN 50131

IV

Additional information

Warranty

24 months