Skip to main content
AllDigital

Compare
Back

Product code: #ALL-000838

Wireless temperature detector Ajax FireProtect 2 RB (Heat/CO) (8EU) ASP white, Ajax

Ajax

Wireless temperature detector Ajax FireProtect 2 RB (Heat/CO) (8EU) ASP white, Ajax

267 ₾

VAT included

  • In stock
267 ₾

VAT included

  • In stock
Quantity
1

Installation request
PaymentBy cardBy bank transfer
Datasheet (opens in a new tab)

Compare with similar

Full comparison

Description

The Ajax FireProtect 2 RB (Heat/CO) is a wireless fire detector that combines a heat sensor with a chemical CO sensor. It communicates over the Jeweller wireless protocol and runs on 2 × CR123A batteries. The model shown here is the white version of the Ajax FireProtect 2 RB (Heat/CO).

The heat sensor is built according to the requirements for Class A1R heat detectors. It raises an alarm at temperatures above 147°F, or when the temperature rises more than 50°F in 1 minute or less. The chemical CO sensor has a service life of 10 years. The built-in siren sounds at 85 dB at a distance of 9 ft, and the detector can pass on alarms from interconnected fire detectors via primary interconnection.

Key features:

  • Detection: heat sensor and chemical CO sensor, with a CO alarm at more than 50 ppm (0.005%) within 90 minutes, more than 100 ppm (0.01%) within 40 minutes, and more than 300 ppm (0.03%) within 3 minutes
  • Wireless: Jeweller protocol with a communication range of 1700 m (5577.4 ft), GFSK modulation, up to 20 mW ERP, and block encryption with a floating key
  • Power: 2 × CR123A batteries with a battery life of up to 7 years
  • Tamper protection: tamper switch, device authentication, and detection of lost communication within 15 minutes
  • Built-in siren: 85 dB at a distance of 9 ft
  • Operating conditions: 0 … +50 °C (32 … 122 °F), humidity up to 80%, IP20 protection
  • Body: 1.71″ × 3.39″ × 3.39″, weight 149 g (5.26 oz), available in Black and White

Specifications 29

Open the spec sheet PDF(opens in a new tab)

Power & Protection

IP / IK Rating
IP20
Power Source
Battery (2 × CR123A)

Overview

Detection Type
Heat sensor + chemical CO sensor
Wireless Protocol
Jeweller
Wireless Range
1700 m (5577.4 ft)
Encryption
Block encryption with a floating key

Battery

Battery
2 × CR123A
Battery Life
up to 7 years

Physical

Operating Temperature
0 … +50 °C (32 … 122 °F)
Dimensions
44 × 86 × 86 mm (1.73 × 3.39 × 3.39 in)
Weight
149 g (5.26 oz)
Tamper Alarm
Yes

Full specification

Manufacturer data, 17 parameters

Communication

Radio Frequency Bands
866.0 – 866.5 MHz 868.0 – 868.6 MHz 868.7 – 869.2 MHz 905.0 – 926.5 MHz 915.85 – 926.5 MHz 921.0 – 922.0 MHz
Maximum effective radiated power (ERP)
up to 20 mW
Radio signal modulation
GFSK

Dangerous Temperature Detection

Sensitive element
according to the requirements for Class A1R heat detectors
High Temperature Alarm
at temperatures above 147°F
Temperature Spike Alarm
when the temperature rises more than 50°F in 1 minute or less

Carbon monoxide (CO) detection

Sensitive element
chemical CO sensor
Alarm if accumulated dose of CO is exceeded
more than 50 ppm (0.005%) — no more than in 90 minutes;
more than 100 ppm (0.01%) — no more than in 40 minutes;
more than 300 ppm (0.03%) — no more than in 3 minutes
Sensor life
10 years

Additional Features

Built-in Siren
volume 85 dB at a distance of 9 ft
Interconnected Fire Detector Alarms
via primary interconnection

Anti-sabotage protection

Protection against spoofing
device authentication
Detection of Communication Failure
within 15 minutes

Power Supply

For FireProtect 2 RB (Heat/CO)
2 × CR123A battery

Enclosure

Operating Humidity
up to 80%
Colours
Black;
White

Additional information

Warranty
24 months

Related products