Skip to main content
AllDigital

Compare
Back

Product code: #ALL-003148

Two-loop addressable fire alarm panel

UniPOS · IFS7002-2

Two-loop addressable fire alarm panel

  • IP / IK RatingIP40
  • Fire Device TypeInteractive fire control panel, 2 signal loops
2 256.60 ₾

VAT included

  • Out of stock

This model is not in stock at any branch right now.

Similar, in stock

From the same category, closest in specs and price

Compare all four

Installation request
PaymentBy cardBy bank transfer
Datasheet (opens in a new tab)

Related products

Description

The UniPOS IFS7002-2 is an addressable fire alarm control panel with 2 signal loops. It has a graphic LCD touch-screen and LED indication of main events and conditions, and it connects to mains power at 220/230 VAC, 50/60 Hz.

Each loop supports up to 125 addressable devices, and the panel can manage up to 250 fire alarm zones with up to 60 devices per zone. It can work in a network with the FS5200E fire extinguishing control panel and uses 2 × 12 VDC, 18 Ah backup batteries.

Key features:

  • 2 signal loops with up to 125 addressable devices each, plus 1 power loop; loop cable cross-section of 0.5-2.5 mm2 and maximum loop resistance of 100Ω
  • Up to 250 fire alarm zones, with up to 60 addressable devices per zone
  • Graphic LCD touch-screen and LED indication of main events and conditions
  • Event memory: up to 9999 events in the fire event counter and up to 1023 events in the non-volatile archive
  • Outputs: 2 monitored potential outputs at 28V DC/1A and 1 auxiliary supply output at 24VDC/1A
  • Interfaces: 1 RS 232 or RS 485 and 2 CAN
  • Dimensions of 480 x 445 x 100 mm, weight of 7.1 kg (15.65 lb), IP40 protection, operating temperature of -5 … +40 °C (23 … 104 °F)

Specifications 29

Open the spec sheet PDF(opens in a new tab)

Power & Protection

IP / IK Rating
IP40
Mains Voltage
220/230 VAC, 50/60 Hz

Overview

Fire Device Type
Interactive fire control panel, 2 signal loops
System Type
Addressable

Detection

LED Indicator
LED indication of main events and conditions;
graphic LCD touch-screen

System Capacity

Loops
2
Devices per Loop
125
Devices per Zone
60
Network Panels
Network operation with FS5200E fire extinguishing control panel

Battery

Battery Backup
2 × 12 VDC, 18 Ah

Physical

Operating Temperature
-5 … +40 °C (23 … 104 °F)
Weight
7.1 kg (15.65 lb)

Full specification

Manufacturer data, 17 parameters

Technical Data

Fire Alarm Loops
signal: 2;
power: 1
Addressable Devices in One Signal Loop
Up to 125
Cross Section of the Signal Loop Wire
(0.5-2.5) mm2
Maximum Resistance of the Signal Loop
100Ω
Number of Devices in One Branch
Up to 32
Fire Alarm Zones
Up to 250
Addressable Devices in One Zone
Up to 60
Response Time to Activated Detector Signal
Up to 10 seconds
Registered Events by the Counter of Fire Events
Up to 9999
Registered Events by the None Voltage Archive Memory
Up to 1023
Power Supply
mains: 220/230VAC, 50/60Hz;
backup batteries: 2×12 VDC, 18Ah
Current Consumption of Power Supply Loop
Up to 1A
Outputs
monitored, potential 28V DC/1A: 2;
auxiliary supply 24VDC/1A: 1
Interfaces
RS 232 or RS 485: 1;
CAN: 2
Dimensions
480 x 445 x 100 mm
Relative Humidity
(93±3) % at 40°C
Degree of Protection
IP 40