Skip to main content
AllDigital

Compare
Back

Product code: #ALL-002504

Switch DS-3E1552P-SI

Hikvision

Switch DS-3E1552P-SI

  • Total Ports52
  • Port SpeedGigabit (10/100/1000 Mbps)
  • PoE Budget470 W
2 413 ₾

VAT included

  • In stock
2 413 ₾

VAT included

  • In stock
Quantity
1

1 in stock

PaymentBy cardBy bank transfer
Datasheet (opens in a new tab)

PoE budget

Powers 46 cameras at 6.5 W each

Calculate exactly

Compare with similar

Full comparison

Description

The Hikvision DS-3E1552P-SI is a smart, web-managed PoE switch with 52 Gigabit ports, of which 48 are PoE ports. It mounts in a rack and has a PoE budget of 470 W, with up to 30 W per port.

The switch supports 802.3af (PoE) and 802.3at (PoE+). Its port layout is 48 Gigabit PoE ports, 2 Gigabit RJ45 ports and 2 Gigabit fiber optical ports. It can be managed through the web interface, Hik-Central Pro or remote management via Hik-Partner Pro, and it supports SNMP v1/v2c/v3 for third-party management platforms.

Key features:

  • 48 PoE ports (ports 1 to 48) supporting 802.3af and 802.3at, with a 470 W PoE budget and up to 30 W per port
  • 104 Gbps switching capacity, 77.38 Mpps forwarding rate, 16 K MAC table and 12 Mbits internal cache
  • Long range transmission on ports 1 to 48 of up to 300 m, which may vary depending on camera model or cable condition
  • PoE Watchdog on ports 1 to 48 to auto detect and restart cameras that do not respond, and Perpetual PoE that keeps PoE active during system reboot, except in cases of power outage or PSE firmware upgrade
  • VLAN (802.1Q) with up to 4094 VLANs, STP/RSTP, link aggregation, QoS and loop prevention
  • Security functions including port isolation, storm control, DHCP Snooping, IPv4 and MAC ACL, and IPSG with 256 security entries
  • Rack mounting, 440.00 mm × 44.00 mm × 323.80 mm (17.32'' × 1.73'' × 12.71''), 4.35 kg net weight, 0 … +45 °C operating temperature, 240 VAC input and 6 kV surge protection

Specifications 46

Open the spec sheet PDF(opens in a new tab)

Power & Protection

Power Input
240 VAC
Power Consumption
500 W
Surge Protection
6 kV

Ports & PoE

PoE Ports
48
Total Ports
52
Port Speed
Gigabit (10/100/1000 Mbps)
PoE Standard
802.3af (PoE), 802.3at (PoE+)
PoE Budget
470 W

Performance

Management
Smart / Web-Managed
Switching Capacity
104 Gbps
Forwarding Rate
77.38 Mpps

Features

VLAN (802.1Q)
Yes
Max VLANs
4094
STP / RSTP / MSTP
STP/RSTP
Link Aggregation
Yes
QoS
Yes
Loop Prevention
Yes

Compliance

Certifications
CE

Physical

Form Factor / Chassis
Rackmount
Operating Temperature
0 … +45 °C (32 … 113 °F)
Mounting
Rack

Full specification

Manufacturer data, 25 parameters

General

Net Weight
4.35 kg (9.59 lb)
Gross Weight
4.5 kg (9.92 lb)
Dimensions (W × H × D)
440.00 mm × 44.00 mm × 323.80 mm (17.32'' × 1.73'' × 12.71'')
Storage Temperature
-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity
5% to 95% (no condensation)
Relative Humidity
5% to 95% (no condensation)
Power Consumption in Idle
30 W

Network Parameters

Ports
48 × Gigabit PoE port,2 × Gigabit RJ45 port,2 × Gigabit fiber optical port
MAC Address Table
16 K
Internal Cache
12 Mbits

Software Function

Long Range
Ports 1 to 48: up to 300 m.;
Long range performance may vary depend on camera model or cable condition.
Port Isolation
Ports 1 to 52: port isolation mode to improve network security;
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog
Ports 1 to 48: auto detect and restart the cameras that do not respond.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:;
1. Display the port rate.;
2. Display the port bandwidth utilization rate.;
3. Display the PoE power usage.;
4. Display topology information.;
5. Display the alarm status.;
6. Restart ports and devices.;
7. Enable port long-rage mode.;
8. Remotely upgrade the device.
System Maintenance
Support device management via web.;
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.;
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.;
Support management via Hik-Central Pro.;
Support remote management via Hik-Partner Pro.;
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.;
Support 802.1ab LLDP for peer device discovery.;
Support SNMP v1/v2c/v3 for third-party management platform access.;
Support port mirroring for fault locating.
Port Rate-Limiting
Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
Storm Control
Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.;
Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
DHCP Snooping
DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disable by default.
ACL
Support ACL definitions based on source/destination MAC address, source/destination IP address, IP protocol type.;
Support ACL application on ports.;
Support IPv4 ACL and MAC ACL configurations.;
Support inbound ACLs.
IPSG
IPSG can control the security of port access device.;
Support port, MAC, IP binding.;
Support 256 security entries.

PoE Power Supply

PoE Power Pin
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port
PoE: Ports 1 to 48
Max. Port Power
30 W
Perpetual PoE
Supported;
PoE remains active during system reboot, except in cases of power outage or PSE firmware upgrade.

Approval

Chemistry
CE-RoHS (201165EU);
WEEE (201219EU);
Reach (Regulation (EC) No.19072006)

Related products