Skip to main content
AllDigital

Compare
Back

Product code: #ALL-002547

Switch POE DS-3E1510P-EI V2

Hikvision

Switch POE DS-3E1510P-EI V2

  • Total Ports10
  • Port SpeedGigabit (10/100/1000 Mbps)
  • PoE Budget110 W
422 ₾

VAT included

  • In stock
422 ₾

VAT included

  • In stock
Quantity
1

PaymentBy cardBy bank transfer
Datasheet (opens in a new tab)

PoE budget

Powers 8 cameras at 6.5 W each

Calculate exactly

Compare with similar

Full comparison

Description

The Hikvision DS-3E1510P-EI (V2) is a smart, web-managed PoE switch with 10 Gigabit ports (10/100/1000 Mbps). 8 of them are PoE ports supporting 802.3af (PoE) and 802.3at (PoE+), and 2 are Gigabit RJ45 ports. It has a PoE budget of 110 W and delivers up to 30 W per port.

The switch has a desktop housing and can be placed on a desk or mounted on a wall. It can be managed through a web interface, Hik-Central Pro or remotely through Hik-Partner Pro. It takes a 54VDC, 2.22A power input and has a total power consumption of 120 W.

Key features:

  • 8 x Gigabit PoE ports (ports 1 to 8) and 2 x Gigabit RJ45 ports, with end-span PoE power on pins 1/2(-) and 3/6(+)
  • Long range mode on ports 1 to 8 reaches up to 300 m, depending on camera model and cable condition. PoE Watchdog automatically detects and restarts cameras that do not respond.
  • 20 Gbps bandwidth, 14.88 Mpps forwarding rate, 4K MAC table and 1.5 Mbits internal buffer
  • VLAN (802.1Q) with up to 32 VLANs, link aggregation, and port isolation, where ports in an isolation group cannot communicate with each other but can reach ports outside the group
  • Loop prevention with 802.1D STP and 802.1w RSTP (disabled by default)
  • Management tools: DHCP Client (enabled by default), Super IP 10.180.190.200 for direct access, 802.1ab LLDP, port mirroring for fault locating, and cable detection for open circuits, short circuits and cable length
  • 6 kV voltage protection, 2.7 W standby consumption, CE, CE-RoHS (2011/65/EU), WEEE (2012/19/EU) and Reach (Regulation (EC) No.1907/2006) compliance, operating range 0 °C to 40 °C, dimensions 217.6 × 27.6 × 108.5 mm, net weight 0.54 kg

Specifications 38

Open the spec sheet PDF(opens in a new tab)

Power & Protection

Power Input
54VDC, 2.22A
Power Consumption
120 W
Surge Protection
6 kV

Ports & PoE

PoE Ports
8
Total Ports
10
Port Speed
Gigabit (10/100/1000 Mbps)
PoE Standard
802.3af (PoE), 802.3at (PoE+)
PoE Budget
110 W

Performance

Management
Smart / Web-Managed
Switching Capacity
20 Gbps
Forwarding Rate
14.88 Mpps
MAC Table
4K

Features

VLAN (802.1Q)
Yes
Max VLANs
32
Link Aggregation
Yes

Compliance

Certifications
CE

Physical

Form Factor / Chassis
Desktop
Mounting
Desktop / Wall
Dimensions
217.6 × 27.6 × 108.5 mm (8.57 × 1.09 × 4.27 in)

Full specification

Manufacturer data, 19 parameters

General

Storage Temperature
-40 °C to 85 °C (-40 °F to 185 °F)
Gross Weight
1.27 kg (2.8 lb)
Net Weight
0.54 kg (1.19 lb)
Power Consumption in Idle
2.7 W
Operating Temperature
0 °C to 40 °C (32 °F to 104 °F)
Operating Humidity
5% to 95% (no condensation)
Relative Humidity
5% to 95% (no condensation)

Network Parameters

Ports
8 × Gigabit PoE port,2 × Gigabit RJ45 port
Internal Cache
1.5 Mbits

Software Function

Long Range
Ports 1 to 8: up to 300 m.;
Long range performance may vary depend on camera model or cable condition.
Port Isolation
Ports 1 to 8: port isolation mode to improve network security;
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog
Ports 1 to 8: auto detect and restart the cameras that do not respond.
Loop Prevention
Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.;
Support 802.1D STP.;
Support 802.1w RSTP.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:;
1. Display the port rate.;
2. Display the port bandwidth utilization rate.;
3. Display the PoE power usage.;
4. Display topology information.;
5. Display the alarm status.;
6. Restart ports and devices.;
7. Enable port long-rage mode.;
8. Remotely upgrade the device.
System Maintenance
Support device management via web.;
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.;
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.;
Support management via Hik-Central Pro.;
Support remote management via Hik-Partner Pro.;
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.;
Support 802.1ab LLDP for peer device discovery.;
Support port mirroring for fault locating.

PoE Power Supply

PoE Power Pin
End-span: 1/2(-), 3/6(+)
PoE Port
PoE: Ports 1 to 8
Max. Port Power
30 W

Approval

Chemistry
CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Related products