Skip to main content
AllDigital

Compare
Back

Product code: #ALL-002511

Switch DS-3T1310P-SI/HS Smart Managed

Hikvision

Switch DS-3T1310P-SI/HS Smart Managed

  • Total Ports10
  • Port Speed10/100 Mbps
  • PoE Budget110 W
601 ₾

VAT included

  • In stock
601 ₾

VAT included

  • In stock
Quantity
1

PaymentBy cardBy bank transfer
Datasheet (opens in a new tab)

PoE budget

Powers 8 cameras at 6.5 W each

Calculate exactly

Compare with similar

Full comparison

Description

The Hikvision DS-3T1310P-SI/HS is a smart managed PoE switch with 10 ports: 8 10/100 Mbps PoE ports, 1 Gigabit RJ45 port and 1 Gigabit fiber optical port. The 8 PoE ports support 802.3af (PoE) and 802.3at (PoE+) and share a 110 W PoE budget.

The switch is managed through a web interface, Hik-Central Pro or remote management via Hik-Partner Pro. It can be placed on a desktop or mounted on a DIN-rail, and it operates from -30 to +65 °C.

Key features:

  • PoE: ports 1 to 8 deliver up to 30 W per port, with a 110 W PoE budget. The PoE Watchdog function detects cameras that do not respond and restarts them.
  • Long range: ports 1 to 8 support transmission up to 300 m. Performance may vary depending on camera model or cable condition.
  • Switching: 9.2 Gbps bandwidth, 6.84 Mpps forwarding rate, a 16K MAC table and a 4 Mbits internal cache.
  • Layer 2 functions: VLAN (802.1Q) with up to 4094 VLANs, STP/RSTP, link aggregation, QoS, port mirroring and loop prevention.
  • Security: port isolation, storm control, DHCP Snooping, port rate limiting, and ACLs (IPv4 and MAC, inbound) based on MAC address, IP address and IP protocol type.
  • Management: DHCP Client, a fixed Super IP address (10.180.190.200) for direct access, 802.1ab LLDP for peer device discovery, and cable detection for open circuits, short circuits and cable length. Through Hik-Partner Pro, it supports 1-click activation, port and PoE power monitoring, topology and alarm display, port and device restart, and remote upgrades.
  • Power and build: 48VDC, 2.5A input, 120 W power consumption, 6 kV surge protection and CE certification. Dimensions are 197 × 114.2 × 42.2 mm (7.76 × 4.5 × 1.66 in) and net weight is 0.6 kg (1.3 lb).

Specifications 45

Open the spec sheet PDF(opens in a new tab)

Power & Protection

Power Input
48VDC, 2.5A
Power Consumption
120 W
Surge Protection
6 kV

Ports & PoE

PoE Ports
8
Total Ports
10
Port Speed
10/100 Mbps
PoE Standard
802.3af (PoE), 802.3at (PoE+)
PoE Budget
110 W

Performance

Management
Smart / Web-Managed
Switching Capacity
9.2 Gbps
Forwarding Rate
6.84 Mpps
MAC Table
16K

Features

VLAN (802.1Q)
Yes
Max VLANs
4094
STP / RSTP / MSTP
STP/RSTP
Link Aggregation
Yes
QoS
Yes
Port Mirroring
Yes
Loop Prevention
Yes

Compliance

Certifications
CE

Physical

Form Factor / Chassis
Rackmount
Operating Temperature
-30 … +65 °C (-22 … 149 °F)
Mounting
Desktop / DIN-rail
Dimensions
197 × 114.2 × 42.2 mm (7.76 × 4.5 × 1.66 in)

Full specification

Manufacturer data, 21 parameters

General

Net Weight
0.6 kg (1.3 lb)
Gross Weight
1.2 kg (2.6 lb)
Storage Temperature
-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity
5% to 95% (no condensation)
Relative Humidity
5% to 95% (no condensation)
Power Consumption in Idle
10 W

Network Parameters

Ports
8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
Internal Cache
4 Mbits

Software Function

Long Range
Ports 1 to 8: up to 300 m.;
Long range performance may vary depend on camera model or cable condition.
Port Isolation
Ports 1 to 8: port isolation mode to improve network security;
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog
Ports 1 to 8: auto detect and restart the cameras that do not respond.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:;
1. Display the port rate.;
2. Display the port bandwidth utilization rate.;
3. Display the PoE power usage.;
4. Display topology information.;
5. Display the alarm status.;
6. Restart ports and devices.;
7. Enable port long-rage mode.;
8. Remotely upgrade the device.
System Maintenance
Support device management via web.;
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.;
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.;
Support management via Hik-Central Pro.;
Support remote management via Hik-Partner Pro.;
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.;
Support 802.1ab LLDP for peer device discovery.;
Support port mirroring for fault locating.
Storm Control
Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.;
Support port rate limiting based on broadcast, multicast, and unknown unicast packets.
DHCP Snooping
DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
Port Rate-Limiting
Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
ACL
Support ACL definitions based on source/destination MAC address, source/destination IP address, IP protocol type.;
Support ACL application on ports.;
Support IPv4 ACL and MAC ACL configurations.;
Support inbound ACLs.

PoE Power Supply

PoE Power Pin
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port
PoE: Ports 1 to 8
Max. Port Power
30 W

Approval

Chemistry
CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Related products