Switch POE DS-3E1309P-EI

Power & Protection

Power Input

54VDC,2.22A

Power Consumption

120 W

Surge Protection

6 kV

Ports & PoE

PoE Ports

8

Total Ports

9

Port Speed

10/100 Mbps

PoE Standard

802.3af (PoE), 802.3at (PoE+)

PoE Budget

110 W

Performance

Management

Smart / Web-Managed

Forwarding Rate

4.17 Mpps

Features

Link Aggregation

Yes

Compliance

Certifications

CE

Physical

Form Factor / Chassis

Rackmount

Operating Temperature

0 … +40 °C (32 … 104 °F)

Mounting

Rack

General

Net Weight

0.35 kg (0.77 lb)

Gross Weight

1.114 kg (2.45 lb)

Dimensions (W × H × D)

170.00 mm × 27.60 mm × 93.10 mm (6.69'' × 1.09'' × 3.67'')

Storage Temperature

-40 °C to 85 °C (-40 °F to 185 °F)

Operating Humidity

5% to 95% (no condensation)

Relative Humidity

5% to 95% (no condensation)

Installation Mode

Desk-Mounted,Wall-Mounted

Power Consumption in Idle

10 W

Network Parameters

Ports

8 × 10/100 Mbps PoE port,1 × Gigabit RJ45 port

MAC Address Table

8K

Switching Capacity

Whole-Device Performance: 5.6 Gbps;
Port Performance: 3.6 Gbps

Internal Cache

4 Mbits

Software Function

Long Range

Ports 1 to 8: up to 300 m.;
Long range performance may vary depend on camera model or cable condition.

Port Isolation

Ports 1 to 8: port isolation mode to improve network security;
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog

Ports 1 to 8: auto detect and restart the cameras that do not respond.

Loop Prevention

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported:;
1. Display the port rate.;
2. Display the port bandwidth utilization rate.;
3. Display the PoE power usage.;
4. Display topology information.;
5. Display the alarm status.;
6. Restart ports and devices.;
7. Enable port long-rage mode.;
8. Remotely upgrade the device.

System Maintenance

Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.;
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.;
Support management via Hik-Central Pro.;
Support remote management via Hik-Partner Pro.;
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.;
Support 802.1ab LLDP for peer device discovery.;
Support port mirroring for fault locating.

PoE Power Supply

PoE Power Pin

8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

PoE Port

PoE: Ports 1 to 8

Max. Port Power

30 W

Approval

Chemistry

CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)