Skip to main content
AllDigital

Back

Product code: #ALL-002541

Switch POE DS-3E1310P-SI V2

Hikvision

Switch POE DS-3E1310P-SI V2

  • Total Ports10
  • Port Speed10/100 Mbps
  • PoE Budget125 W
494 ₾

VAT included

  • In stock
494 ₾

VAT included

  • In stock
Quantity
1

PaymentBy cardBy bank transfer
Datasheet (opens in a new tab)

PoE budget

Powers 8 cameras at 6.5 W each

Calculate exactly

Compare with similar

Full comparison

Description

The Hikvision DS-3E1310P-SI V2 is a managed PoE switch with 10 ports: 8 × 10/100 Mbps PoE ports and 2 × Gigabit combo ports. It supports 802.3af (PoE) and 802.3at (PoE+), with a PoE budget of 125 W and up to 30 W per port.

The switch is managed through a web interface, SNMP v1/v2c or Hik-Partner Pro. It has a metal housing and mounts in a rack. It works with 100-240 VAC input.

Key features:

  • 8 PoE ports (ports 1 to 8) with a 125 W PoE budget and up to 30 W per port
  • Switching performance of 9.2 Gbps bandwidth, 6.84 Mpps forwarding rate and a 16K MAC table
  • VLAN (802.1Q) with up to 4094 VLANs, plus QoS, port mirroring, loop prevention and STP/RSTP
  • Long range mode on ports 1 to 8 for transmission up to 300 m, where performance may vary depending on camera model or cable condition
  • PoE Watchdog on ports 1 to 8 that detects and restarts cameras that do not respond
  • Port isolation mode to improve network security, with 6 kV surge protection
  • Remote management through Hik-Partner Pro, including port rate, bandwidth utilization, PoE power usage, topology and alarm status, plus LLDP (802.1ab) for peer device discovery

Power & Protection

Power Input
100-240 VAC
Surge Protection
6 kV

Ports & PoE

Total Ports
10
Port Speed
10/100 Mbps
PoE Standard
802.3af (PoE), 802.3at (PoE+)
PoE Budget
125 W

Performance

Switching Capacity
9.2 Gbps
Forwarding Rate
6.84 Mpps
MAC Table
16K

Features

VLAN (802.1Q)
Yes
Max VLANs
4094
STP / RSTP / MSTP
STP/RSTP
QoS
Yes
Port Mirroring
Yes
Loop Prevention
Yes
SNMP
Yes

Compliance

Certifications
CE, FCC, UL

Physical

Operating Temperature
0 … +45 °C (32 … 113 °F)
Mounting
Rack

Full specification

Manufacturer data, 19 parameters

General

Shell
Metal material
Net Weight
1.72 kg (3.79 lb)
Gross Weight
2.20 kg (4.85 lb)
Dimensions (W × H × D)
266.00 mm × 44.50 mm × 220.80 mm (10.47'' × 1.75'' × 8.69'')
Storage Temperature
-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity
5% to 95% (no condensation)
Relative Humidity
5% to 95% (no condensation)
Power Consumption in Idle
5W

Network Parameters

Ports
8 × 10/100 Mbps PoE port,2 × Gigabit combo
Internal Cache
4 Mbits

PoE Power Supply

PoE Power Pin
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port
PoE: Ports 1 to 8
Max. Port Power
30 W

Software Function

Long Range
Ports 1 to 8: up to 300 m.;
Long range performance may vary depend on camera model or cable condition.
Port Isolation
Ports 1 to 8: port isolation mode to improve network security.;
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog
Ports 1 to 8: auto detect and restart the cameras that do not respond.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:;
1. Display the port rate.;
2. Display the port bandwidth utilization rate.;
3. Display the PoE power usage.;
4. Display topology information.;
5. Display the alarm status.;
6. Restart ports and devices.;
7. Enable port long-rage mode.;
8. Remotely upgrade the device.
System Maintenance
Support device management via web.;
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.;
Support remote management via Hik-Partner Pro.;
Support 802.1ab LLDP for peer device discovery.;
Support SNMP v1/v2c for third-party management platform access.;
Support port mirroring for fault locating.

Approval

Chemistry
CE-RoHS (201165EU);;
WEEE (201219EU);;
Reach (Regulation (EC) No.19072006)

Related products