Skip to main content
AllDigital

Compare
Back

Product code: #ALL-002515

Switch PoE Hikvision, DS-3E1326P-EI(B)

Hikvision

Switch PoE Hikvision, DS-3E1326P-EI(B)

  • Total Ports24
  • Port Speed10/100 Mbps
  • PoE Budget370 W
1 081 ₾

VAT included

  • In stock
1 081 ₾

VAT included

  • In stock
Quantity
1

1 in stock

PaymentBy cardBy bank transfer
Datasheet (opens in a new tab)

PoE budget

Powers 24 cameras at 6.5 W each

Calculate exactly

Compare with similar

Full comparison

Description

The Hikvision DS-3E1326P-EI(B) is a managed PoE switch in a rackmount case measuring 440 × 44 × 220.8 mm (17.32 × 1.73 × 8.69 in). It has 24 PoE ports with a speed of 10/100 Mbps and 2 Gigabit combo ports. The PoE ports support 802.3af (PoE) and 802.3at (PoE+).

The switch can be managed through a web interface, Hik-Central Pro or remotely through Hik-Partner Pro. Its PoE Watchdog function detects cameras that do not respond and restarts them.

Key features:

  • PoE: ports 1 to 24 support 802.3af (PoE) and 802.3at (PoE+), with a PoE budget of 370 W and up to 30 W per port.
  • Long range transmission: ports 1 to 24 reach up to 300 m. Long range performance may vary depending on camera model or cable condition.
  • Performance: 14.8 Gbps switching capacity, 16K MAC table, 4 Mbits internal cache, and packet forwarding of 11.01 Mpps for the whole device and 6.55 Mpps per port.
  • Network functions: VLAN (802.1Q), STP/RSTP, loop prevention, port isolation on ports 1 to 26, static link aggregation with 1 aggregation group, and DHCP Snooping (disabled by default).
  • Traffic control: port-based QoS priority, SP and WRR scheduling modes, DSCP-based QoS policy, and VIP ports 1 to 8 whose data is forwarded first when bandwidth is insufficient.
  • Management and diagnostics: DHCP Client enabled by default, Super IP 10.180.190.200 for direct access, 802.1ab LLDP, port mirroring, and cable detection for open circuits, short circuits and cable length.
  • Power and operating conditions: 100-240 VAC input, 400 W power consumption, 6 kV surge protection, operating temperature of 0 °C to 45 °C (0 °F to 113 °F), CE certification, and a net weight of 2.83 kg (6.24 lb).

Specifications 40

Open the spec sheet PDF(opens in a new tab)

Power & Protection

Power Input
100-240 VAC
Power Consumption
400 W
Surge Protection
6 kV

Ports & PoE

PoE Ports
24
Total Ports
24
Port Speed
10/100 Mbps
PoE Standard
802.3af (PoE), 802.3at (PoE+)
PoE Budget
370 W

Performance

Switching Capacity
14.8 Gbps
MAC Table
16K

Features

VLAN (802.1Q)
Yes
STP / RSTP / MSTP
STP/RSTP
Loop Prevention
Yes

Compliance

Certifications
CE

Physical

Form Factor / Chassis
Rackmount
Mounting
Rack
Dimensions
440 × 44 × 220.8 mm (17.32 × 1.73 × 8.69 in)

Full specification

Manufacturer data, 23 parameters

General

Net Weight
2.83 kg (6.24 lb)
Gross Weight
3.8 kg (8.38 lb)
Operating Temperature
0 °C to 45 °C (0 °F to 113 °F)
Storage Temperature
-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity
5% to 95% (no condensation)
Relative Humidity
5% to 95% (no condensation)
Power Consumption in Idle
30 W

Network Parameters

Ports
24 × 10/100 Mbps PoE port,2 × Gigabit combo
Packet Forwarding Rate
Whole-Device Performance: 11.01 Mpps;
Port Performance: 6.55 Mpps
Internal Cache
4 Mbits

Software Function

Long Range
Ports 1 to 24: up to 300 m.;
Long range performance may vary depend on camera model or cable condition.
VIP Port
Ports 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
Port Isolation
Ports 1 to 26: port isolation mode to improve network security;
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog
Ports 1 to 24: auto detect and restart the cameras that do not respond.
Link Aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.;
Support static link aggregation.;
Support 1 aggregation group(s).
QoS
QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.;
Support port-based priority configuration.;
Support SP and WRR priority scheduling modes.;
Support DSCP-based QoS policy.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:;
1. Display the port rate.;
2. Display the port bandwidth utilization rate.;
3. Display the PoE power usage.;
4. Display topology information.;
5. Display the alarm status.;
6. Restart ports and devices.;
7. Enable port long-rage mode.;
8. Remotely upgrade the device.
System Maintenance
Support device management via web.;
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.;
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.;
Support management via Hik-Central Pro.;
Support remote management via Hik-Partner Pro.;
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.;
Support 802.1ab LLDP for peer device discovery.;
Support port mirroring for fault locating.
DHCP Snooping
DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.

PoE Power Supply

PoE Power Pin
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port
PoE: Ports 1 to 24
Max. Port Power
30 W

Approval

Chemistry
CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)

Related products