Switch POE DS-3E1318P-EI

Power & Protection

Power Input

100-240 VAC

Power Consumption

250 W

Surge Protection

6 kV

Ports & PoE

PoE Ports

16

Total Ports

18

Port Speed

10/100 Mbps

PoE Standard

802.3af (PoE), 802.3at (PoE+)

PoE Budget

230 W

Performance

Management

Smart / Web-Managed

Forwarding Rate

6.84 Mpps

Features

Link Aggregation

Yes

Compliance

Certifications

CE

Physical

Form Factor / Chassis

Rackmount

Operating Temperature

0 … +45 °C (32 … 113 °F)

Mounting

Rack

General

Net Weight

2.59 kg (5.71 lb)

Gross Weight

3.68 kg (8.11 lb)

Dimensions (W × H × D)

440.00 mm × 44.00 mm × 220.80 mm (17.32'' × 1.73'' × 8.69'')

Storage Temperature

-40 °C to 85 °C (-40 °F to 185 °F)

Operating Humidity

5% to 95% (no condensation)

Relative Humidity

5% to 95% (no condensation)

Power Consumption in Idle

20 W

Network Parameters

Ports

16 × 10/100 Mbps PoE port,2 × Gigabit combo

MAC Address Table

16 K

Switching Capacity

Whole-Device Performance: 9.2 Gbps;
Port Performance: 7.2 Gbps

Internal Cache

4 Mbits

PoE Power Supply

PoE Power Pin

8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)

PoE Port

PoE: Ports 1 to 16

Max. Port Power

30 W

Software Function

Long Range

Ports 1 to 16: up to 300 m.;
Long range performance may vary depend on camera model or cable condition.

VIP Port

Ports 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.

Port Isolation

Ports 1 to 16: port isolation mode to improve network security;
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.

PoE Watchdog

Ports 1 to 16: auto detect and restart the cameras that do not respond.

Loop Prevention

Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default.;
Support 802.1D STP.;
Support 802.1w RSTP.

VLAN

VLAN is used for network scale planning and network health improvement.;
Support 802.1Q.;
Configurable VLAN ID from 1-4094.;
Support Trunk, Access port mode.;
Support Max. 4094 VLAN.

HPP

Support one-click activation and remote management via Hik-Partner Pro. Functions supported:;
1. Display the port rate.;
2. Display the port bandwidth utilization rate.;
3. Display the PoE power usage.;
4. Display topology information.;
5. Display the alarm status.;
6. Restart ports and devices.;
7. Enable port long-rage mode.;
8. Remotely upgrade the device.

System Maintenance

Support device management via web.;
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.;
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.;
Support management via Hik-Central Pro.;
Support remote management via Hik-Partner Pro.;
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.;
Supports 802.1ab LLDP for peer device discovery.;
Support port mirroring for fault locating.

Approval

Chemistry

CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)