Skip to main content
AllDigital

Compare
Back

Product code: #ALL-002551

Switch POE DS-3E1518P-EI/M

Hikvision

Switch POE DS-3E1518P-EI/M

  • Total Ports18
  • Port SpeedGigabit (10/100/1000 Mbps)
  • PoE Budget130 W
876 ₾

VAT included

  • In stock
876 ₾

VAT included

  • In stock
Quantity
1

PaymentBy cardBy bank transfer
Datasheet (opens in a new tab)

PoE budget

Powers 12 cameras at 6.5 W each

Calculate exactly

Compare with similar

Full comparison

Description

The Hikvision DS-3E1518P-EI/M is a smart, web-managed PoE switch with 18 Gigabit ports: 16 Gigabit PoE ports, 1 Gigabit RJ45 port and 1 Gigabit fiber optical port. It supports 802.3af (PoE) and 802.3at (PoE+), with a PoE budget of 130 W and a maximum of 30 W per port.

The switch is installed in a rack and runs on 100~240 VAC. It can be managed through the web interface, Hik-Central Pro or remotely through Hik-Partner Pro, and it includes VLAN, link aggregation, port mirroring and loop prevention functions.

Key features:

  • 16 PoE ports (ports 1 to 16) with 802.3af and 802.3at support, 130 W PoE budget and up to 30 W per port
  • Switching capacity of 56 Gbps, forwarding rate of 41.66 Mpps, 8K MAC table and 4.1 Mbits internal cache
  • 802.1Q VLAN with up to 4094 VLANs, STP/RSTP, link aggregation, port mirroring and loop prevention
  • Long range transmission on ports 1 to 16 of up to 300 m, which may vary depending on camera model or cable condition
  • PoE Watchdog on ports 1 to 16 to detect and restart cameras that do not respond
  • Port isolation, DHCP Snooping (disabled by default), and QoS with port-based priority, SP and WRR scheduling and DSCP-based policy
  • Cable detection, 802.1ab LLDP, DHCP Client and Super IP (default: 10.180.190.200), 6 kV surge protection, 440.0 mm × 44.0 mm × 220.8 mm rackmount housing, 0 … +45 °C operating temperature

Specifications 42

Open the spec sheet PDF(opens in a new tab)

Power & Protection

Power Input
100~240 VAC
Power Consumption
150 W
Surge Protection
6 kV

Ports & PoE

PoE Ports
16
Total Ports
18
Port Speed
Gigabit (10/100/1000 Mbps)
PoE Standard
802.3af (PoE), 802.3at (PoE+)
PoE Budget
130 W

Performance

Management
Smart / Web-Managed
Switching Capacity
56 Gbps
Forwarding Rate
41.66 Mpps

Features

VLAN (802.1Q)
Yes
Max VLANs
4094
STP / RSTP / MSTP
STP/RSTP
Link Aggregation
Yes
Port Mirroring
Yes
Loop Prevention
Yes

Compliance

Certifications
CE

Physical

Form Factor / Chassis
Rackmount
Operating Temperature
0 … +45 °C (32 … 113 °F)
Mounting
Rack

Full specification

Manufacturer data, 21 parameters

General

Net Weight
2.7 kg (5.9 lb)
Gross Weight
2.9 kg (6.4 lb)
Dimensions (W × H × D)
440.0 mm × 44.0 mm × 220.8 mm (17.32'' × 1.73'' × 8.69'')
Storage Temperature
-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity
5% to 95% (no condensation)
Relative Humidity
5% to 95% (no condensation)
Power Consumption in Idle
20 W

Network Parameters

Ports
16 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
MAC Address Table
8K
Internal Cache
4.1 Mbits

Software Function

Long Range
Ports 1 to 16: up to 300 m.;
Long range performance may vary depend on camera model or cable condition.
Port Isolation
Ports 1 to 18: port isolation mode to improve network security;
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog
Ports 1 to 16: auto detect and restart the cameras that do not respond.
QoS
QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.;
Support port-based priority configuration.;
Support SP and WRR priority scheduling modes.;
Support DSCP-based QoS policy.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:;
1. Display the port rate.;
2. Display the port bandwidth utilization rate.;
3. Display the PoE power usage.;
4. Display topology information.;
5. Display the alarm status.;
6. Restart ports and devices.;
7. Enable port long-rage mode.;
8. Remotely upgrade the device.
System Maintenance
Support device management via web.;
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.;
Support Super IP, which is a configurable IP address (default: 10.180.190.200) for direct access.;
Support management via Hik-Central Pro.;
Support remote management via Hik-Partner Pro.;
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.;
Support 802.1ab LLDP for peer device discovery.;
Support port mirroring for fault locating.
DHCP Snooping
DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.

PoE Power Supply

PoE Power Pin
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port
PoE: Ports 1 to 16
Max. Port Power
30 W

Approval

Chemistry
CE-RoHS (201165EU);
WEEE (201219EU);
Reach (Regulation (EC) No.19072006)

Related products