Skip to main content
AllDigital

Compare
Back

Product code: #ALL-002550

Switch POE DS-3E1518P-EI

Hikvision

Switch POE DS-3E1518P-EI

  • Total Ports18
  • Port SpeedGigabit (10/100/1000 Mbps)
  • PoE Budget230 W
1 319 ₾

VAT included

  • In stock
1 319 ₾

VAT included

  • In stock
Quantity
1

PaymentBy cardBy bank transfer
Datasheet (opens in a new tab)

PoE budget

Powers 16 cameras at 6.5 W each

Calculate exactly

Compare with similar

Full comparison

Description

The Hikvision DS-3E1518P-EI is a smart, web-managed PoE switch with 18 Gigabit ports: 16 Gigabit PoE ports, 1 Gigabit RJ45 port and 1 Gigabit fiber optical port. It supports the 802.3af (PoE) and 802.3at (PoE+) standards and has a PoE budget of 230 W, with a maximum of 30 W per port.

The switch is built for rack installation, with a rackmount housing measuring 440.0 mm × 44.0 mm × 220.8 mm (17.32'' × 1.73'' × 8.69''). It runs on 100~240 V AC input and offers 6 kV surge protection. Software functions include VLAN, link aggregation, port mirroring, port isolation, QoS, DHCP Snooping and a PoE Watchdog that restarts cameras that do not respond.

Key features:

  • 18 Gigabit ports (10/100/1000 Mbps): 16 PoE ports, 1 RJ45 port and 1 fiber optical port
  • PoE 802.3af and 802.3at with a 230 W PoE budget and up to 30 W per port; ports 1 to 16 reach up to 300 m, and range may vary depending on camera model or cable condition
  • 56 Gbps bandwidth, 41.66 Mpps forwarding rate, 8K MAC table and 4.1 Mbits internal cache
  • VLAN (802.1Q) with up to 4094 VLANs, STP/RSTP, link aggregation, port mirroring and loop prevention
  • QoS with port-based priority configuration and SP and WRR scheduling modes; port isolation on ports 1 to 18 and DHCP Snooping (disabled by default)
  • PoE Watchdog on ports 1 to 16 to auto detect and restart cameras that do not respond, plus scheduled PoE on and off to cut power to IPCs during idle periods
  • Operating temperature 0 … +45 °C (32 … 113 °F), humidity 5% to 95% (no condensation), net weight 2.85 kg (6.28 lb), CE certified, CE-RoHS (2011/65/EU), WEEE (2012/19/EU) and Reach (Regulation (EC) No.1907/2006) compliant

Specifications 41

Open the spec sheet PDF(opens in a new tab)

Power & Protection

Power Input
100~240 V AC
Power Consumption
250 W
Surge Protection
6 kV

Ports & PoE

PoE Ports
16
Total Ports
18
Port Speed
Gigabit (10/100/1000 Mbps)
PoE Standard
802.3af (PoE), 802.3at (PoE+)
PoE Budget
230 W

Performance

Management
Smart / Web-Managed
Switching Capacity
56 Gbps
Forwarding Rate
41.66 Mpps

Features

VLAN (802.1Q)
Yes
Max VLANs
4094
STP / RSTP / MSTP
STP/RSTP
Link Aggregation
Yes
Port Mirroring
Yes
Loop Prevention
Yes

Compliance

Certifications
CE

Physical

Form Factor / Chassis
Rackmount
Operating Temperature
0 … +45 °C (32 … 113 °F)
Mounting
Rack

Full specification

Manufacturer data, 20 parameters

General

Net Weight
2.85 kg (6.28 lb)
Gross Weight
3.05 kg (6.72 lb)
Dimensions (W × H × D)
440.0 mm × 44.0 mm× 220.8 mm (17.32'' × 1.73'' × 8.69'')
Storage Temperature
-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity
5% to 95% (no condensation)
Relative Humidity
5% to 95% (no condensation)
Power Consumption in Idle
20 W

Network Parameters

Ports
16 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
MAC Address Table
8K
Internal Cache
4.1 Mbits

Software Function

Long Range
Ports 1 to 16: up to 300 m. Long range performance may vary depend on camera model or cable condition.
Port Isolation
Ports 1 to 18: port isolation mode to improve network security;
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog
Ports 1 to 16: auto detect and restart the cameras that do not respond.
QoS
QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.;
Support port-based priority configuration.;
Support SP and WRR priority scheduling modes.
DHCP Snooping
DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.

PoE Power Supply

PoE Power Pin
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port
PoE: Ports 1 to 16
Max. Port Power
30 W
PoE Power Saving
Power conservation is achieved by scheduling PoE to be enabled or disabled so that the PoE port(s) will cut off power to IPCs during idle periods.

Approval

Chemistry
CE-RoHS (2011/65/EU);
WEEE (2012/19/EU);
Reach (Regulation (EC) No.1907/2006)

Related products