Skip to main content
AllDigital

Compare
Back

Product code: #ALL-002552

Switch POE DS-3E1518P-SI

Hikvision

Switch POE DS-3E1518P-SI

  • Total Ports18
  • Port SpeedGigabit (10/100/1000 Mbps)
  • PoE Budget225 W
1 346 ₾

VAT included

  • Out of stock

This model is not in stock at any branch right now.

Similar, in stock

From the same category, closest in specs and price

Compare all four

PaymentBy cardBy bank transfer
Datasheet (opens in a new tab)

PoE budget

Powers 16 cameras at 6.5 W each

Calculate exactly

Related products

Description

The Hikvision DS-3E1518P-SI is a smart, web-managed PoE switch with 18 Gigabit ports in total: 16 Gigabit PoE ports and 2 Gigabit fiber optical ports. It supports the 802.3af (PoE) and 802.3at (PoE+) standards and has a PoE budget of 225 W, with up to 30 W per port on ports 1 to 16.

The switch mounts in a rack, and mounting ears are included. It has a metal housing and measures 440 × 44 × 220.8 mm (17.32 × 1.73 × 8.69 in). Remote management is available through Hik-Partner Pro, and the PoE ports include a watchdog function that detects and restarts cameras that do not respond.

Key features:

  • 16 Gigabit PoE ports (802.3af/802.3at) with a 225 W PoE budget and up to 30 W per port, plus 2 Gigabit fiber optical ports
  • Switching capacity of 56 Gbps, forwarding rate of 41.66 Mpps, 8K MAC table and 4.1 Mbits internal cache
  • VLAN (802.1Q) with up to 4094 VLANs, link aggregation, QoS, STP and loop prevention
  • Port isolation, port rate limiting and storm control for broadcast, multicast and unknown unicast packets
  • PoE long range transmission up to 300 m on ports 1 to 16 (may vary depending on camera model or cable condition)
  • Hik-Partner Pro support for one-click activation, port rate and bandwidth utilization display, topology information, alarm status, port and device restart, and remote upgrade
  • 6 kV surge protection, 240 VAC input, operating temperature 0 … +45 °C (32 … 113 °F), CE, FCC and UL certifications

Specifications 42

Open the spec sheet PDF(opens in a new tab)

Power & Protection

Power Input
240 VAC
Power Consumption
250 W
Surge Protection
6 kV

Ports & PoE

PoE Ports
16
Total Ports
18
Port Speed
Gigabit (10/100/1000 Mbps)
PoE Standard
802.3af (PoE), 802.3at (PoE+)
PoE Budget
225 W

Performance

Management
Smart / Web-Managed
Switching Capacity
56 Gbps
Forwarding Rate
41.66 Mpps

Features

VLAN (802.1Q)
Yes
Max VLANs
4094
STP / RSTP / MSTP
STP
Link Aggregation
Yes
QoS
Yes
Loop Prevention
Yes

Compliance

Certifications
CE, FCC, UL

Physical

Operating Temperature
0 … +45 °C (32 … 113 °F)
Dimensions
440 × 44 × 220.8 mm (17.32 × 1.73 × 8.69 in)

Full specification

Manufacturer data, 22 parameters

General

Shell
Metal material
Net Weight
2.735 kg (6.03 lb)
Gross Weight
3.31 kg (7.30 lb)
Storage Temperature
-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity
5% to 95% (no condensation)
Relative Humidity
5% to 95% (no condensation)
Installation Mode
Rack (equipped with mounting ears)
Power Consumption in Idle
25 W

Network Parameters

Ports
16 × Gigabit PoE port,2 × Gigabit fiber optical port
MAC Address Table
8K
Internal Cache
4.1 Mbits

PoE Power Supply

PoE Power Pin
End-span: 1/2(+), 3/6(-);
PoE Port
PoE: Ports 1 to 16
Max. Port Power
30 W

Software Function

Long Range
Ports 1 to 16: up to 300 m.;
Long range performance may vary depend on camera model or cable condition.
Port Isolation
Ports 1 to 16: port isolation mode to improve network security.;
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog
Ports 1 to 16: auto detect and restart the cameras that do not respond.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:;
1. Display the port rate.;
2. Display the port bandwidth utilization rate.;
3. Display topology information.;
4. Display the alarm status.;
5. Restart ports and devices.;
6. Remotely upgrade the device.
System Maintenance
Remote upgrade, default parameters recovery, logs viewing, basic network parameters configuration, import and export configuration, time sync
Port Rate-Limiting
Port rate-limiting is used for port bandwidth adjustment to prevent network congestion.
Storm Control
Storm control is used to prevent switch ports from being blocked by broadcast or multicast storms in the LAN, which may affect network communication.;
Support port rate limiting based on broadcast, multicast, and unknown unicast packets.

Approval

Chemistry
CE-RoHS (201165EU);
WEEE (201219EU);
Reach (Regulation (EC) No.19072006)