Skip to main content
AllDigital

Compare
Back

Product code: #ALL-002553

Switch POE DS-3E1526P-EI V2

Hikvision

Switch POE DS-3E1526P-EI V2

  • Total Ports26
  • Port SpeedGigabit (10/100/1000 Mbps)
  • PoE Budget370 W
1 351 ₾

VAT included

  • In stock
1 351 ₾

VAT included

  • In stock
Quantity
1

PaymentBy cardBy bank transfer
Datasheet (opens in a new tab)

PoE budget

Powers 24 cameras at 6.5 W each

Calculate exactly

Compare with similar

Full comparison

Description

The Hikvision DS-3E1526P-EI V2 is a smart, web-managed Gigabit PoE switch with 26 ports in total: 24 Gigabit PoE ports, 1 Gigabit RJ45 port and 1 Gigabit fiber optical port. It supplies power to connected devices under 802.3af (PoE) and 802.3at (PoE+), with a PoE budget of 370 W and up to 30 W per port.

The switch is built into a rackmount housing measuring 440.0 mm × 220.8 mm × 44.0 mm (17.32'' × 8.69'' × 1.73''). It can be managed through a web interface, Hik-Central Pro or remotely through Hik-Partner Pro, and it includes functions such as VLAN, QoS, port isolation and DHCP Snooping.

Key features:

  • 24 Gigabit PoE ports (ports 1 to 24) supporting 802.3af (PoE) and 802.3at (PoE+), with a 370 W PoE budget and up to 30 W per port
  • 1 Gigabit RJ45 port and 1 Gigabit fiber optical port, for 26 ports in total
  • 56 Gbps bandwidth, 41.66 Mpps forwarding rate, 8K MAC table and 4.1 Mbits internal cache
  • Long range transmission up to 300 m on ports 1 to 24 (may vary depending on camera model or cable condition), plus a PoE Watchdog that auto detects and restarts cameras that do not respond
  • VLAN (802.1Q) with up to 4094 VLANs, STP/RSTP, link aggregation, port mirroring and loop prevention
  • QoS with port-based priority configuration and SP and WRR scheduling modes, plus port isolation on ports 1 to 26 and DHCP Snooping (disabled by default)
  • Management by web, DHCP Client (enabled by default), Super IP (default 10.180.190.200), 802.1ab LLDP and cable detection for open circuits, short circuits and cable length

Specifications 42

Open the spec sheet PDF(opens in a new tab)

Power & Protection

Power Input
100~240 V AC
Power Consumption
400 W
Surge Protection
6 kV

Ports & PoE

PoE Ports
24
Total Ports
26
Port Speed
Gigabit (10/100/1000 Mbps)
PoE Standard
802.3af (PoE), 802.3at (PoE+)
PoE Budget
370 W

Performance

Management
Smart / Web-Managed
Switching Capacity
56 Gbps
Forwarding Rate
41.66 Mpps

Features

VLAN (802.1Q)
Yes
Max VLANs
4094
STP / RSTP / MSTP
STP/RSTP
Link Aggregation
Yes
Port Mirroring
Yes
Loop Prevention
Yes

Compliance

Certifications
CE, UL

Physical

Form Factor / Chassis
Rackmount
Operating Temperature
0 … +45 °C (32 … 113 °F)
Mounting
Rack

Full specification

Manufacturer data, 21 parameters

General

Net Weight
3.1 kg (6.83 lb)
Gross Weight
3.3 kg (7.27 lb)
Dimensions (W × H × D)
440.0 mm × 220.8 mm × 44.0 mm (17.32'' × 8.69'' × 1.73'')
Storage Temperature
-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity
5% to 95% (no condensation)
Relative Humidity
5% to 95% (no condensation)
Power Consumption in Idle
30 W

Network Parameters

Ports
24 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port
MAC Address Table
8K
Internal Cache
4.1 Mbits

Software Function

Long Range
Ports 1 to 24: up to 300 m.;
Long range performance may vary depend on camera model or cable condition.
PoE Watchdog
Ports 1 to 24: auto detect and restart the cameras that do not respond.
QoS
QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.;
Support port-based priority configuration.;
Support SP and WRR priority scheduling modes.
Port Isolation
Ports 1 to 26: port isolation mode to improve network security;
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
System Maintenance
Support device management via web.;
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.;
Support Super IP, which is a configurable IP address (default: 10.180.190.200) for direct access.;
Support management via Hik-Central Pro.;
Support remote management via Hik-Partner Pro.;
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.;
Support 802.1ab LLDP for peer device discovery.;
Support port mirroring for fault locating.
DHCP Snooping
DHCP Snooping can prevent unauthorized connections to DHCP servers from disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:;
1. Display the port rate.;
2. Display the port bandwidth utilization rate.;
3. Display the PoE power usage.;
4. Display topology information.;
5. Display the alarm status.;
6. Restart ports and devices.;
7. Enable port long-rage mode.;
8. Remotely upgrade the device.

PoE Power Supply

PoE Power Pin
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port
PoE: Ports 1 to 24
Max. Port Power
30 W

Approval

Chemistry
CE-RoHS (2011/65/EU);
WEEE (2012/19/EU);
Reach (Regulation (EC) No.1907/2006)

Related products