Skip to main content
AllDigital

Compare
Back

Product code: #ALL-002544

Switch PoE Hikvision, DS-3E1318P-EI(B)

Hikvision

Switch PoE Hikvision, DS-3E1318P-EI(B)

  • Total Ports16
  • Port Speed10/100 Mbps
  • PoE Budget230 W
751 ₾

VAT included

  • Out of stock

This model is not in stock at any branch right now.

Similar, in stock

From the same category, closest in specs and price

Compare all four

PaymentBy cardBy bank transfer
Datasheet (opens in a new tab)

PoE budget

Powers 16 cameras at 6.5 W each

Calculate exactly

Related products

Specifications 39

Open the spec sheet PDF(opens in a new tab)

Power & Protection

Power Input
100-240 VAC
Power Consumption
250 W
Surge Protection
6 kV

Ports & PoE

PoE Ports
16
Total Ports
16
Port Speed
10/100 Mbps
PoE Standard
802.3af (PoE), 802.3at (PoE+)
PoE Budget
230 W

Performance

Switching Capacity
9.2 Gbps
MAC Table
16K

Features

VLAN (802.1Q)
Yes
STP / RSTP / MSTP
STP/RSTP
Loop Prevention
Yes

Compliance

Certifications
CE

Physical

Form Factor / Chassis
Rackmount
Mounting
Rack
Dimensions
440 × 44 × 220.8 mm (17.32 × 1.73 × 8.69 in)

Full specification

Manufacturer data, 22 parameters

General

Net Weight
2.59 kg (5.71 lb)
Gross Weight
3.68 kg (8.11 lb)
Operating Temperature
0 °C to 45 °C (0 °F to 113 °F)
Storage Temperature
-40 °C to 85 °C (-40 °F to 185 °F)
Operating Humidity
5% to 95% (no condensation)
Relative Humidity
5% to 95% (no condensation)
Power Consumption in Idle
20 W

Network Parameters

Ports
16 × 10/100 Mbps PoE port,2 × Gigabit combo
Packet Forwarding Rate
Whole-Device Performance: 6.84 Mpps;
Port Performance: 5.36 Mpps
Internal Cache
4 Mbits

Software Function

Long Range
Ports 1 to 16: up to 300 m.;
Long range performance may vary depend on camera model or cable condition.
VIP Port
Ports 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
Port Isolation
Ports 1 to 16: port isolation mode to improve network security;
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog
Ports 1 to 16: auto detect and restart the cameras that do not respond.
Link Aggregation
Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection.;
Support static link aggregation.;
Support 1 aggregation groups.
QoS
QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance.;
Support port-based priority configuration.;
Support SP, WRR priority schedule mode.
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:;
1. Display the port rate.;
2. Display the port bandwidth utilization rate.;
3. Display the PoE power usage.;
4. Display topology information.;
5. Display the alarm status.;
6. Restart ports and devices.;
7. Enable port long-rage mode.;
8. Remotely upgrade the device.
System Maintenance
Support device management via web.;
Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.;
Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.;
Support management via Hik-Central Pro.;
Support remote management via Hik-Partner Pro.;
Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.;
Supports 802.1ab LLDP for peer device discovery.;
Support port mirroring for fault locating.

PoE Power Supply

PoE Power Pin
8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
PoE Port
PoE: Ports 1 to 16
Max. Port Power
30 W

Approval

Chemistry
CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)